Universal UK Mains 6A 12V DC Power Adapter for Meade telescopes

Power your Meade telescope from the mains.

For Meade telescopes with 12V power input
Replaces batteries
Volt: 12V DC
Amp: 6A
Power Out Pin: 2.5mm / 2.1mm
Switch mode & regulated
UK warranty

Universal UK Mains 6A 12V DC Power Adapter

Product code: 68026
Availability: In stock
Despatch: 2 business days
Original Price: ~~£ 34.95~~

Shipping rates: England & Wales

£ 6.00

Scotland Central & South

£ 6.00

Scotland North

£ 6.00

Northern Ireland

£ 6.00

UK islands (from)

£ 6.00

European Union (from)

£ 12.00

Worldwide (from)

£ 18.00

Description

A high quality 12V DC switch-mode regulated power supply rated at 72 Watt maximum. The power supply has a wide range 100-220 VAC 50/60Hz input for world use and features short circuit, over voltage and over load current protection.

Recommended for use with all motorised and computerised telescopes that require a stable 12V DC current to operate. This power supply will drive larger mounts and allow enough power for other devices. It comes with a 1.2m mains UK type power lead with a total reach of around 2.1m.

The ferrite core built round the 12V DC power lead reduces electrical interference and prevents eddy currents from reaching the mount / telescope.

U.K. WARRANTY

POWER

ADAPTER

ACCESSORY

▼ read more ▼

Compatible telescopes

StarNavigator NG
ETX125 Observer
LT
LS - LightSwitch
LX65
LXD-75
LX80
LX85
LX90
LX200 ACF, LX200 GPS
LX400
RCX400
LX600
LX850
other Meade telescopes with 12V power input

Note: This is not a Meade Instruments product.

Caution

Please ensure that the power (Watts) required by the equipment connected to any power supply is below the power output rating of the power supply used. This will prolong the life of the equipment and that of the power supply. As a rule of thumb your power supply should be able to supply 25% more power than is required by the device(s) connected to it for best performance.

Carries full one year UK warranty.

▲ read less ▲

▼ show specification ▼

Universal UK Mains Power Adapter for Meade telescopes
Attribute	Specification
Product Code (SKU)	68026
Universal Product Code (UPC)	n/a
Warranty	1 year UK warranty
Experience Level	Beginner
Input Voltage	100~220V AC 50/60Hz
Voltage Output	12V DC
Current Output	6A
Maximum Power	72W
12V DC power-plug pin diameter	2.5mm / 2.1mm
12V DC power plug outer diameter	5.5mm
Mains cable total length	120cm approximately
12VDC power lead (with ferrite core) total length	90cm approximately
Working Temperature	0°C to 40°C
Storage Temperature	-20°C to 60°C
Included Items	• 1 x AC to DC power supply with lead with 2.1mm/2.5mm power plug (pin positive) • 1 x UK type mains power lead • 1 x UK mains plug with 13A removable fuse
Telescope Compatibility	• Meade StarNavigator NG • Meade ETX125 Observer • Meade LT • Meade LS - LightSwitch • Meade LX65 • Meade LXD-75 • Meade LX80 • Meade LX85 • Meade LX90 • Meade LX200 ACF, LX200 GPS • Meade LX400 • Meade RCX400 • Meade LX600 • Meade LX850 • other Meade telescopes with 12V power input
Assembled Product Weight	205 grams (400 grams including both cables)
Assembled Product Dimensions	14cm x 6 cm x 3.8cm