Universal UK Mains 3A 12V DC Power Adapter for Meade telescopes

Power smaller and mid-sized Meade telescopes from the mains.

For Meade telescopes with 12V power input
Replaces batteries
Volt: 12V DC
Amp: 3A
Power Out Pin: 2.5mm / 2.1mm
Switch mode & regulated
UK warranty

Universal UK Mains 3A 12V DC Power Adapter

Product code: 68025
Availability: In stock
Despatch: 2 business days
Original Price: ~~£ 24.95~~

Shipping rates: England & Wales

£ 6.00

Scotland Central & South

£ 6.00

Scotland North

£ 6.00

Northern Ireland

£ 6.00

UK islands (from)

£ 6.00

European Union (from)

£ 12.00

Worldwide (from)

£ 18.00

Description

A high quality 12V DC switch-mode regulated power supply rated at 36 Watt maximum. The power supply has a wide range 100-220 VAC 50/60Hz input for world use and features short circuit, over voltage and over load current protection.

Recommended for use with motorised and computerised telescopes that require a stable 12V DC current to operate. This power supply will drive small and mid-sized telescopes. It comes with a 1.2m mains UK type power lead with a total reach of around 2.1m.

The ferrite core built round the 12V DC power lead reduces electrical interference and prevents eddy currents from reaching the mount / telescope.

U.K. WARRANTY

POWER

ADAPTER

ACCESSORY

▼ read more ▼

Compatible telescopes

StarNavigator NG
ETX125 Observer
LT
LS - LightSwitch
LX65
LXD-75
LX80
LX85
other smaller Meade telescopes with 12V power input

Note: This is not a Meade Instruments product.

Caution

Please ensure that the power (Watts) required by the equipment connected to any power supply is below the power output rating of the power supply used. This will prolong the life of the equipment and that of the power supply. As a rule of thumb your power supply should be able to supply 25% more power than is required by the device(s) connected to it for best performance.

Carries full one year UK warranty.

▲ read less ▲

▼ show specification ▼

Universal UK Mains 3A 12V DC Power Adapter for Meade telescopes
Attribute	Specification
Product Code (SKU)	68025
Universal Product Code (UPC)	n/a
Warranty	1 year UK warranty
Experience Level	Beginner
Input Voltage	100~220V AC 50/60Hz
Voltage Output	12V DC
Current Output	3A
Maximum Power	36W
12V DC power-plug pin diameter	2.5mm / 2.1mm
12V DC power plug outer diameter	5.5mm
Mains cable total length	120cm approximately
12VDC power lead (with ferrite core) total length	90cm approximately
Working Temperature	0°C to 40°C
Storage Temperature	-20°C to 60°C
Included Items	• 1 x AC to DC power supply with lead with 2.1mm/2.5mm power plug (pin positive) • 1 x UK type mains power lead • 1 x UK mains plug with 13A removable fuse
Telescope Compatibility	• Meade StarNavigator NG • Meade ETX125 Observer • Meade LT • Meade LS - LightSwitch • Meade LX65 • Meade LXD-75 • Meade LX80 • Meade LX85 • other smaller and mid-range Meade telescopes with 12V power input
Assembled Product Weight	205 grams (400 grams including both cables)
Assembled Product Dimensions	14cm x 6cm x 3.8cm

▲ hide specification ▲

Products

Similar products

UK Mains Adapter / Charger

Product code: 68028
Availability: In stock
Despatch: 2 business days
Labels: power

Power Extension Lead 5m Straight

Product code: 68068
Availability: In stock
Despatch: 2 business days
Labels: power

Power Extension Lead 5m Angled

Product code: 68069
Availability: In stock
Despatch: 2 business days
Labels: power

Support

Documents: Meade and Coronado catalogue

19.3 MB • 05 February 2021

GPDR (General Data Protection Regulation)

0.2 MB • 12 October 2021

Links: Meade power supply units

internal link • power supply units page